| |
|
Sills:
Pressure Treated 2" x 8" - 2" x 6" - 2" x
4"
|
 |
| Girders:
Triple 2" x 10" Spruce |
| Headers
and Trimmers: Double 2" x 10" Spruce |
| Floor
Joists and Blocking: 2" x 10" Spruce |
| Subfloor:
3/4" Tongue & Groove Flooring |
| Logs:
Milled 6" x 6" Double Tongue and Groove Cedar, Precut
and Numbered |
| Milled
Tongue and Groove Log Siding for Floor Frame Skirting |
| Framing:
2" x 4" and 2" x 6" Shoe, Double Plate, Studs,
Blocking, Headers and Fillers as necessary |
| Knotty
Pine Tongue and V-Groove Boards for Sheathing all Interior Partitions
on both sides |
| 4" x
8" Spruce Beam Ceiling Joists |
|
| Loft
Flooring: 2" x 6" Tongue and Groove Decking |
| Beam
Trusses: 6" x 6", 6" x 8", or 6" x 10" Spruce,
Precut to length & angle |
| Roof
Purlins: 6" x 6" Spruce Precut and Notched at the Gables |
| First
Roof Deck: Tongue and V-Groove Knotty Pine Boards |
| Rigid
Insulation, not included in packages |
| Roof
Strapping: 2" x 4" Spruce 16" on center |
| Second
Roof Deck: 5/8" T&G AdvanTech Sheathing |
| Felt
Paper: 15# Asphalt Rolls |
| Drip
Edge: Galvanized Drip Edge for Eaves and Rakes |
| Shingles:
215# Asphalt Self-Sealing Shingles |
| 6
Panel, Solid Pine Interior Doors with Locksets and Hardware |
| Fiberglass
Exterior Doors with Locksets and Insulating Glass |
|
| Pella
Proline Windows with Screens and Divided Lite Grilles |
| Loft
Stairs: 2" x 12" Stringers with 2" x 10" Treads,
1" x 8" Risers, 2" x 4" Handrail, and Basement
Stairs: 2" x 12" Stringers with Treads and 2" x
4" Handrail |
| Loft
Railing: 2" x 4" Cedar |
| 6" x
6" Wall Braces where required |
| Fascia:
1" x 8" Pine |
| All
Interior Window, Door, and Base Trim: 1 x 4 Pine |
| All
Exterior Door and Window Trim: 1" x 4" Cedar |
| All
Porch Framing: 2" x 6" or 2" x 8" Pressure
Treated |
| Porch
Floor: Cedar Decking |
| Porch
Posts: 6" x 6" Spruce |
| Porch
Railing: 2" x 4" Cedar |
| Porch
Rafters: 4" x 6" Spruce |
| Porch
Roof Deck: Tongue and V-Groove Knotty Pine Boards |
Also
included in packages are all necessary foam gaskets, caulking,
and fastening screws.
|
| |
| |